Chemical Injection Equipment

The 929 Series Pump Setting Gauge provides a means for checking the pumping rate of any chemical pump under actual pumping conditions in one minute.

The Patented KENCO Manifold Kit simplifies the installation of a metering pump and a KENCO Calibration Gauge to a chemical storage tank.

The KENCO KBPV Back Pressure Valves are two-way relief valves designed to keep a constant pressure in the discharge lines of a chemical feed pump system.

KENCO Chemical Injectors are designed to inject and properly atomize corrosive chemicals into the turbulent stream of a process system pipeline.

Drum Gauges are used to visually monitor the liquid level inventory in horizontal 55 gallon chemical storage tanks.

The 7000 Injection Rate Gauge is of the same construction as the 5700 Gauge but is provided with a spring-loaded test valve similar to the valve supplied on the 779 Drum Gauge.

The 17000 Gauge functions as an injection rate gauge and also serves a bulk tank level gauge.

Calibration Pots provide an extremely accurate reading of the pumps output for a wide range of flow rates.