The FLCO rupture disc from OsecoElfab is easy to install and not torque sensitive. The rupture disc can be used between standard 150# ANSI RF flanges. If a flat rupture disc, which functions in two directions with the same burst pressure (in both directions), the FLCO will not be installed incorrectly, eliminating installation errors.

The FLCO rupture disc from Oseco Elfab is easy to install and not torque sensitive. The rupture disc can be used between standard 150# ANSI RF flanges.

If a flat rupture disc, which functions in two directions with the same burst pressure (in both directions), the FLCO will not be installed incorrectly, eliminating installation errors.

The disc is made with a metal center section, lined on both sides with a fluoropolymer liner for a corrosion resistant barrier.

Ring gaskets attached to both sides complete the assembly and are available in choice of materials.

An optional integral sensor (FLCOS) combines overpressure protection and breakage detection in one device. This low pressure rupture disc is recommended for applications

which does not allow the normal working pressure to exceed 50% of the rated burst pressure.